HQD Looper AIO review - mesh coil heads, and is super easy to use
Well, as you should remember, this team specializes exclusively in the starting segment - pod vape kit - the novelty presented today is also no exception. However, it is worth noting that according to its "status" this project should be called almost the largest in the entire history of the manufacturer, although in fact the device turned out to be very simple.
Parameters
Dimensions: 92 x 42 x 20mm
Case material: aluminum alloy + plastic
Power: built-in 1200mAh
Cartridge capacity: 3.5ml
Evaporator resistance: 0.6 / 1.2 / 1.4Ω
Output power: 10 - 20W
Voltage range: 3.2 - 4.2V
Operating mode: POWER
Protection: against low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: magnetic
Screen / diagonal: no
The design of the novelty HQD Looper AIO is original, although the selected form factor is rather hackneyed. So our hero is decorated with a lined case, which contrasts favorably with the dark top. The dimensions are relatively compact, but you probably should not count on stealth with such a purchase. The profile is asymmetrical - this should have a positive effect on ergonomics.
A removable cartridge of decent capacity, it will refuel from the bottom. There is a causal hole covered by a check valve. A slot is visible on the back to control the level of the charged airflow. The drip type is removable, but not the 510th.
Replaceable evaporators are represented by three types. The lower resistance is made on the grid, and the larger on ceramics, but the latter will not be included in the vape aio kit. Airflow adjustment is provided - a traditional swivel ring at the base of the evaporator.
Other products recommend:
aegis pod system kit 800mah
 |
| HQD Looper AIO Pod kit review |
Parameters
Dimensions: 92 x 42 x 20mm
Case material: aluminum alloy + plastic
Power: built-in 1200mAh
Cartridge capacity: 3.5ml
Evaporator resistance: 0.6 / 1.2 / 1.4Ω
Output power: 10 - 20W
Voltage range: 3.2 - 4.2V
Operating mode: POWER
Protection: against low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: magnetic
Screen / diagonal: no
The design of the novelty HQD Looper AIO is original, although the selected form factor is rather hackneyed. So our hero is decorated with a lined case, which contrasts favorably with the dark top. The dimensions are relatively compact, but you probably should not count on stealth with such a purchase. The profile is asymmetrical - this should have a positive effect on ergonomics.
 |
| buy HQD Looper AIO Pod kit |
A removable cartridge of decent capacity, it will refuel from the bottom. There is a causal hole covered by a check valve. A slot is visible on the back to control the level of the charged airflow. The drip type is removable, but not the 510th.
Replaceable evaporators are represented by three types. The lower resistance is made on the grid, and the larger on ceramics, but the latter will not be included in the vape aio kit. Airflow adjustment is provided - a traditional swivel ring at the base of the evaporator.
Other products recommend:
aegis pod system kit 800mah
Comments
Post a Comment